Installation for HandsFree Car Kit


 

①  On the back of the MHF-R330BT unit you will see two pairs
      of clips. Place the bottom pair  of clips on the underside
      of your existing rearview mirror. Lift the unit so that the
      bottom clips extend allowing the top clips to be fixed in
      position on top of your Rearview mirror and securely hold
      the handsfree unit in place.   Adjust the fitted unit to your
      preference for clear rear vision.

②  Select a suitable position for the microphone depending
      on your vehicle type, this should be placed close to the
      users head - the driver sun visor is normally adequate.  
      "It is highly recommended to have the front of the

      microphone (side with more holes) directly facing the operator for the best voice pickup."  
      The microphone can be placed either back or front of the visor by detaching, rotating and re-attaching
      microphone holder to correct side of the microphone.
 

③  Clip a microphone on the driver's sun visor recommended to keep a distance of the microphone from the
      MHF-R330BT unit as long as possible.

④  Insert the power jack of the power adapter cable (4M).

⑤  Connect the Power Adapter Cable into its respective socket on the MHF-R330BT unit.

⑥  The power lead should be secured and hidden into the vehicles interior using the seals or joins around the
      windscreen and door "A-Frame" and under your dashboard. Ensure that you leave yourself enough cable to be
      able to connect to your cigarette lighter socket.

Note : Please ensure that the microphone and power cable do not interfere with the safe operation of your vehicle.

 

   >> Pairing your Bluetooth cellular phone with the MHF-R330BT

The MHF-R330BT supports both HandsFree and Headset Profiles. The default profile is HandsFree. Follow the pairing instructions for the first use, after that the unit will pair automatically.

Power On : It appears   (start) on the mirror.

 Voice announcement  "Power On"  

 

1. When the power is on, press the "VOL ▲" button for 3 seconds.

2. You will hear a beep tone.
    The HandsFree unit is now ready to be paired
    for the first time.

    It appears Pairing on the mirror.

1. Browse your cellular phone menu and find the connectivity and / or Bluetooth connection
    section.

2. Select the "search for" a new HandsFree device function and allow the phone to find the
     MHF-R330BT.
     Note : Each cellular phone type has distinct phone menu so you may need to refer to
                 your manufacture's instructions for the correct procedure on how to "connect
                 a new Bluetooth device".　

3. The Bluetooth code for the MHF-R330BT should appear on your cellular phone screen.

4. Press the "connect" with the HandsFree option on your cellular phone.
     Note : Please return to the pairing instructions if the Bluetooth code does not appear on the
                 cellular phone screen. The green LED light should flash during pairing.

5. The cellular phone should prompt for a pin code. Insert the MHF-R330BT pin code : 1  2  3  4

6. The cellular phone should confirm that it has established a new paired connection.


7. Close the menu.  
     The pairing is now completed. 

    It appears Paired & Connected on the Mirror.
    Voice announcement  "Connected" 


     Note : The red LED light illuminates after successful pairing.
                Please adjust the volume to your preference by using the volume keys.

 

         

 

 

   Send Call :

    Calling on the mirror.

 

   Mute :

    Secret on the mirror.

 

 

 

 

   >> Using the MHF-R330BT as a HandsFree Device

To accept call

press "SEND" button
It appears Accept Call on the mirror.

To reject call

press "END" button
It appears Drop Call on the mirror.

Voice Announcing for caller ID

press and hold "VOL ▼" button for 2 seconds.
Display will show  Elod 1 or 2.
 Elod 1 : Voice announcing for caller ID
 Elod 2 : No voice announcing, Showing caller ID only.
Set to your chosen option by repeating same
procedure.


 

To end call

press "END" button
It appears Drop Call on the mirror.

To control volume

press "VOL▲" / "VOL▼" button
It appears Vol Up or  Vol Dn(down) on the mirror.

* Speaker Volume Level : 1 ~ 15


 

 

The audio transfer function is for switching the call from the HandsFree unit to the cellular phone for a private conversation without disconnecting the call.

Switching from HandsFree to cellular phone :  Press and hold "END" button (for 3 seconds)
Switching back to HandsFree :  Press and hold "END" button (for 3 seconds)


It appears Call Trans on the mirror.

 

Double Click  "SEND" button connecting to the
second call.

It appears Redial on the mirror.

Note : This function only works if you have a call waiting option with your carrier and also another
           call is actually waiting to be answered.

 

Press "SEND" button.

It appears Redial on the mirror.

Note : This function only works if phone has "last number redial"  feature.

 

Press and hold  "SEND" button (for 2 seconds)

It appears Voice Dial on the mirror.
Announce name after a beep.

Note : Voice dialling is possible only if your cellular phone has a voice dialling capability.  Each cellular
            phone type has distinct phone menu so you may need to refer to your manufacture's  instructions.

 

HandsFree Call (Send Call) in the Car

Press phone number on the cellular phone, and press "SEND" button of  Hands Free.
Note : If there is no sound on the loudspeaker of Hands Free unit, press and hold  "END" button for 3 seconds.
           Then, it will switch from Cellular Phone to Hands Free.

Private conversation option:
 The operator can plug an earphone (not included) in to the earphone jack of the MHF-R330BT for a private conversation.
Note : For your own safety, it is highly recommended that the vehicle is parked in the safe place when plugging
            in the earphone.

 

 

 

PAIRING INSTRUCTION FOR THE SMART PHONES

Note :
A) Some of the advanced features such as the voice caller ID would not properly work with the smart phones featuring the HEADSET Profile only.
B) It is common for most of the smart phones have the extra security feature (similar to the firewall in the computer network system) requiring users to PAIR the smart phones with the Bluetooth devices first and then go back to the connection feature in the phone menu to Authorize the Bluetooth device to be permanently CONNECTED with the handsfree system.

Let's try to pair the smart phones to the ModooFree Plus BT handsfree unit as the HANDSFREE profile first!

Please follow the below Initial pairing instruction.
1. Make sure that the smart phone battery is fully charged.
2. Clear/delete all Bluetooth devices registered in your smart phone.
     Also, turn off the unit and take out the battery (reset) and reinsert the battery and turn on the unit.
3. Turn on the power of the ModooFree Plus BT handsfree unit.
4. Turn on the Bluetooth on the smart phone by following the smart phone manual.
5. Press Vol(+) button of the ModooFree Plus BT handsfree unit for 5 seconds and wait for the confirmation
     melody.
6. Discover the ModooFree Plus BT handsfree units on your smart phone.
7. Once your smart phone discovers the ModooFree Plus BT handsfree unit, enter the Authentication Passkey
     complete pairing.
8. If there is no connection, go back to the Bluetooth Settings in your smart phone.  Services tab and make
    sure that the ModooFree Plus BT handsfree unit is AUTHORIZED to be paired with your smart phone.  
    You will  hear the paired confirmation melody once ModooFree Plus BT handsfree unit is paired with the
    smart phone.

* Pairing with the headset mode, the ModooFree Plus BT handsfree unit does not support the CALLER ID features.

Please repeat the step 1 to 4.

COMPATIBILITY:
The ModooFree Plus BT Handsfree products are compatible with most Bluetooth equipped mobile phones.
The ModooFree Plus BT Handsfree products support most of the Bluetooth mobile phones features such as the last number dialing, Audio transfer, Caller ID, etc if the Bluetooth mobiles contains such features.

Must Power off for vehicles with the DC auxiliary power jack feature:
Some vehicles continuously supply 12 Volt DC power to the auxiliary power jack (cigar jack) even the engine is off and the ignition key is out of the vehicle.
The user must pull out the power jack cord before exiting the vehicle making sure the Bluetooth unit power is off. Otherwise, either the phone or handsfree would not function properly requiring the user to turn both phone and handsfree off and reconnect by following the manual. 

 

  >> Troubleshooting

 
No indication from unit?
There is a chance the power cable plug is not correctly seated in the cigar/utility jack socket for proper connection. Remove and reinsert to ensure good fitting and connection.

Problem during pairing?
Repeat pairing process according to the pairing section

Still experiencing problem?
Turn off the cellular phone and separate the battery from the cellular phone for approximately  five seconds (In some instances, this action clears up any potential bugs built up in the cellular phone software that can hinder proper pairing.)  Repeat pairing process as per previous pairing instructions.

Too loud?
Adjust the volume to your preferred sound level by pressing the relevant volume switch.

Callers are complaining about hearing noise?
Check that the microphone is secured firmly in place and is not creating vibration and noise.   Also check and adjust microphone accordingly to ensure that it is facing towards to the user’s face.

   >> Safety Precautions

 - Do not expose this unit under humid environment.
- Do not drop this unit.
- Do not disassemble this unit.
- Do not press two buttons at once. This action may cause a sudden Bluetooth disconnection.
- Do not clean the unit with any chemical or water.
- Keep this unit away from fire and dust.
- For safety reasons, please keep your phone conversation short, do not make any notes or read documents.  
  It is highly recommended to park the vehicle in the safe place before continuing the conversation.  
  Using a cellular phone while driving can potentially create a distraction for the driver which may increase
  the likelihood of an accident.
- Please adjust direction of the mirror to ensure good Rearview vision for safe driving

 

* The instruction of this manual may be different from some Bluetooth phones
   according to the phone’s manufacturer or its unique function.
 

    >> Warranty

ModooTronix Inc. warrants to purchaser that for a period of one (1) year after the date of purchase (the “Warranty Period”) of any ModooTronix Inc. Product by Purchaser, the product will substantially conform to ModooTronix Inc. published specifications for the product on the date of purchaser’s purchase of the product, subject to the terms herein. Purchaser shall notify ModooTronix Inc. of any non-conformance during the warranty period and obtain a written return material authorization (“RMA”) from ModooTronix Inc. for the nonconforming product and return the nonconforming product to ModooTronix Inc., freight prepaid with a statement describing the nonconformity. ModooTronix Inc. exclusive obligation with respect to nonconforming product shall be, at ModooTronix Inc.‘s option and expense, to repair or replace such returned item. The foregoing is purchaser’s sole and exclusive remedy for breach of warranty by ModooTronix Inc.‘s with respect to the product. The warranty set forth above shall not apply to any product, which has not been properly used or handled in accordance with the instructions supplied by ModooTronix Inc. In addition, ModooTronix Inc. ‘s warranty is void if the product has been repaired, altered, damaged by the faulty installation, misuse, abuse, or which the product defect is attributable to any failure or damage which is beyond the reasonable control of ModooTronix Inc. This warranty applies only to new ModooTronix Inc. products purchased from authorized retail sellers only. The foregoing warranties are the sole warranties, express or implied, given by ModooTronix Inc. in connection with the product, and ModooTronix Inc. disclaims all other warranties, including warranties of merchantability, fitness for a particular purpose and no infringement of third party rights.

ModooTronix Inc. shall not be liable for any special, incidental or consequential damages in connection with the product, even if ModooTronix Inc. has been advised of the possibility of such damages. The liability of ModooTronix Inc. hereunder for all claims shall not exceed the amount paid by purchaser to ModooTronix Inc. for the product sold rise to ModooTronix Inc.‘s liability.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ModooTronix Inc. is under license. Other trademarks and trade names are those of their respective owners.